BLS (Latex Emulsion Pump Horizontal Type)

Performance Charts 50Hz
BLS-Performance Charts 50Hz
1. Pump selection tables are based on pumping liquid with specific gravity of 1.0 and viscosity of 1.0mPa·s.
2. Motor output (kW) is shown with dotted lines.
3. If your latex has viscosity of 50mPa·s or greater, select an appropriate pump by multiplying the output by the applicable coefficient of viscosity given below.
(Viscosity in this case is apparent viscosity)
50∼0499mPa·s---1.2 , 500∼0999mPa·s---1.3 , 1000∼1999mPa·s---1.4
4. If your latex has specific gravity of more than 1.0, mutiply the output by that specific gravity.
Pump Frame and Bore Size
Frame No 523 529 534 625 634 829 840 1032 1232 1532
Suction Bore
(mmØ)
50 50 50 65 65 80 80 100 125 150
Discharge Bore
(mmØ)
50 50 50 65 65 80 80 100 125 150
Due to products improvement, please acknowledge that the above information might change without a previous notice.
If you have any problems viewing our website, please report it using the following link.
close
HONDA KIKO CO.,ltd.