HONDA PUMPS / HONDA KIKO CO.,ltd. Site map
Japanese
Home Business & Products Company Profile Customer Support Services Contact Us
Business & Products Business & Products
Business & Products
Specialty pumps, others
Inquiry
Best in Class
FGD and Power Generation
Chemical Process
Pulp and Paper
General Industry
Food, Metals and Automotive
Water and Wastewater

Specialty pumps, others
CHAS(F)
Features
High-pressure between 2 and 5 Mpa, capacity up to 3.0m³/min.
High head obtained by combining sectional and multistage designs.
Special impeller design allowing low-NPSH and low-noise operation.
Applications
Reverse osmosis systems.
High-pressure washer systems.
Boiler Feed.
Fire fighting applications.
Water supply.
Horizontal Vertical Wetted parts material Shaft Seal Temperature
FCD S13 S14 S16 Special GP Me
- 0ºC∼150ºC
Impeller Multi-Stage High-Head High-Temperature Slurry Support
Closed Open
- - Foot
CLAS(F)
Features
Mixed flow centrifugal pump for head from 10m to 15m and capacity up to
50m³/min.
Foot support type in back-pull-out design, easy maintenance without
disconnecting piping.
Applications
Seawater and drainage transport.
Flue gas desulphurization systems (FGD).
Horizontal Vertical Wetted parts material Shaft Seal Temperature
FC S13 S14 S16 Special GP Me
- -50ºC∼180ºC
Impeller Multi-Stage High-Head High-Temperature Slurry Support
Closed Open
- - Foot
CES(F)
Features
Axial flow pump for low head (2m to 6m) and high capacity (5 to 50 m³/min).
Applications
Used as a circulation pump for large variety of tanks.
Horizontal Vertical Wetted parts material Shaft Seal Temperature
FC S13 S14 S16 Special GP Me
- -50ºC∼250ºC
Impeller Multi-Stage High-Head High-Temperature Slurry Support
Closed Open
- - Center
BNOS(F)
Features
Reduced installation space by stationary vertical shaft system.
Impeller with special design allowing solid particles Clogging-free
operations.
Applications
Transport of sewages in different applications.
Horizontal Vertical Wetted parts material Shaft Seal Temperature
FC S13 S14 S16 Special GP Me
- 0ºC∼80ºC
Impeller Multi-Stage High-Head High-Temperature Slurry Support
Closed Open
- - - - Foot
2CS(F)
Features
Two-stage with bracket support pump for total head between 150m and 250m.
Impellers in Back-to-Back arrangement providing increased stability.
Applications
Boiler feed systems.
High-pressure washers.
Skyscraper feed water supply system.
Horizontal Vertical Wetted parts material Shaft Seal Temperature
FCD S13 S14 S16 Special GP Me
- -40ºC∼170ºC
Impeller Multi-Stage High-Head High-Temperature Slurry Support
Closed Open
- - Bracket
CSPS(F)
Features
Ultra-self priming pump with suction head up to 9m.
Special design featuring Open and Screw Impeller reducing self priming time.
Self-priming ability maintained when suction side piping is between 10m and 30m.
Applications
Aircraft Fuel pumping systems.
Residual liquid suction in chemical tankers applications.
Horizontal Vertical Wetted parts material Shaft Seal Temperature
FC S13 S14 S16 Special GP Me
- -40ºC∼80ºC
Impeller Multi-Stage High-Head High-Temperature Slurry Support
Closed Open
- - - - - Center
WCS(F)
Features
Centrifugal pump with full-Jacket casing Type.
Stabilized casing temperature.
Applications
Transfer of normal temperature solidified liquids.
Transfer of warm-up state liquids.
Horizontal Vertical Wetted parts material Shaft Seal Temperature
FC S13 S14 S16 Special GP Me
- - - 0ºC∼170ºC
Impeller Multi-Stage High-Head High-Temperature Slurry Support
Closed Open
- - Center
V
Features
Pump for high temperature fluid Transfers.
Suited for automated control and can accommodate in reduced space.
Applications
Molten salts, sulfur and dissolved metals Transfers.
Petrochemical, steel, iron and paper mill Industries.
Oil refinery, chemical fertilizer industries.
Horizontal Vertical Wetted parts material Shaft Seal Temperature
FC S13 S14 S16 Special GP Me
- - - 0ºC∼450ºC
Impeller Multi-Stage High-Head High-Temperature Slurry Support
Closed Open
- - - -
Special materials pump
Please contact us if you require special materials for your application
(Hastelloy, Titan, Nickel, etc.).
Due to products improvement, please acknowledge that the above information might change without a previous notice.
If you have any problems viewing our website, please report it using the following link.
* Top Page